PCI-20364M-1 Analog Input Module |
PCI-20364M-1 ¿É¼Ç ¸ðµâ Ư¡
´Ù¾çÇÑ ÇüÅÂÀÇ Å͹̳Π¿É¼ÇÀ» ¿¬°áÇÏ¿© »ç¿ë °¡´É |
|
¸ð µ¨ ¹ø È£ |
ºñ °í |
PCI-20363M-2 |
8 ä³Î, Simultaneous Sample/Hold Module |
PCI-20303T-1 |
Euro-Style(3U), 16SE/8DIFF ä³Î, Analog Termination Panel |
PCI-20303T-2 |
Euro-Style(3U), Thermocouple, 7DIFF ä³Î, Analog Termination Panel |
PCI-20353T-1 |
Euro-Style(3U), 8 ä³Î, Analog Termination Panel for 5B Signal Conditioner |
PCI-20354T-1 |
Euro-Style(3U), 8 ä³Î È®Àå¿ë, Analog Termination Panel for 5B Signal Condition |
PCI-20364M-1 Çϵå¿þ¾î »ç¾ç |
||
Parameter |
Conditions |
Specification |
Analog Input |
||
Number of Channels
|
Single-ended Differential |
16 8 |
Resolution |
|
12/16/18 bits (1 part in 4,096/ 65,536/ 262,144) |
Voltage Ranges(2)
|
Normal Mode Gain = 1 Gain = 10 Gain = 100 Gain = 200 |
±5V, 0 to 10V ±0.5V, 0 to 1.0V ±0.05V, 0 to 0.1V ±0.025V, 0 to 0.05V |
Extended Mode Gain = 1 Gain = 10 Gain = 100 Gain = 200 |
±7V, -2 to 12V ±0.7V, -0.2 to 1.2V ±0.07V, -0.02 to 0.12V ±0.035V, -0.01 to 0.06V |
|
Overvoltage Protection
|
Power on Power off |
±35V ±20V |
Gain Accuracy
|
Gain = 1 Gain = 10 Gain = 100 Gain = 200 |
±0.01% ±0.01% ±0.02% ±0.02% |
Offset Voltage |
RTO |
±1.22mV |
Bias Current |
|
1.0nA |
Input Impedance |
Single-ended |
1011 ohms/50pF |
Common Mode |
|
|
Range (Vrange) |
Vcm = V range - (Vdiff * Gain)/2 |
±10V, (dc + peak ac) |
Rejection Error
|
50/60Hz, 100 ohm imbalance Gain = 1 Gain = 10 Gain = 100 Gain = 200 |
96dB (0.1LSB/V) 116dB (0.1LSB/V) 118dB (0.83LSB/V) -118dB (1.65LSB/V) |
Noise
|
Counts peak/LSBs RMS |
|
12-bit mode All gains 16-bit mode Gain = 1, 10 Gain = 100, 200 |
±0.5 Counts/0LSB
±1.5 Counts/0.5LSB ±2 Counts/0.7LSB |
|
18-bit mode Gain = 1, 10 Gain = 100 Gain = 200 |
±3.5 Counts/1LSB ±4 Counts/1.4LSB ±7 Counts/2.3LSB |
|
Monotonicity |
No missing code |
16 bits |
Linearity Error |
|
±0.003% |
System Throughput(3) |
||
Multichannel Analog Input
|
Standard Mode |
|
12-bit resolution 16-bit 18-bit |
500Hz 50Hz 12.5Hz |
|
50Hz rejection mode 16-bit 18-bit |
45Hz 9.8Hz |
|
60Hz rejection mode 16-bit 18-bit |
28Hz 12Hz |
|
Physical Characteristics |
||
Power Requirements(4) +5V +15V -15V |
|
400mA 4mA 25mA |
Operating Temperature Range |
|
0 to +70°C |
Notes: (1) In most cases, the extended ranges offer excellent performance at or near the specifications shown for the linear ranges. However, only the linear ranges are verified during final production test. (2) The typical specifications shown apply when internal auto-calibration is used. Improvements are possible when external auto-calibration is used. (3) Hardware limit only. Software may reduce speed. (4) Refer to the data sheet of the host board to determine available power. |
PCI-20364M-1 Çϵå¿þ¾î »çÁø
Çѱ¹ÀÎÅÚ¸®Á¯Æ®½Ã½ºÅÛ(Korea Intelligent System) ÀüÈ : 02-3272-9301 Email : sales@intelligent.co.kr |