한국인텔리젼트시스템

PCI-20341M-1A Analog Input Module

PCI-20341M-1A 옵션 모듈 특징

85kHz, 16-bit, 4DIFF 아날로그 입력

프로그램머블 게인 - 1, 10, 100 & 200

Pre-트리거

터미널 패널 옵션

다양한 형태의 터미널 옵션을 연결하여 사용 가능

PCI-20341M 모듈

모 델 번 호	비 고
PCI-20341M-1A	16-bit, 85kHz, Analog Input Module, 4DIFF 채널
Signal Conditioning & Termination Panel
PCI-20303T-1	Euro-Style(3U), 16SE/8DIFF 채널, Analog Termination Panel
PCI-20303T-2	Euro-Style(3U), Thermocouple, 7DIFF 채널, Analog Termination Panel
PCI-20353T-1	Euro-Style(3U), 8 채널, Analog Termination Panel for 5B Signal Conditioner
PCI-20354T-1	Euro-Style(3U), 8 채널 확장용, Analog Termination Panel for 5B Signal Conditioner

PCI-20341M-1A 하드웨어 사양

Parameter

Conditions

Specification

Analog Input

Number of Channels

Single-ended
Differential

1
4

Resolution

16 bits (1 part in 65,536)

Voltage Ranges

±5V, ±0.5V , ±50mV, ±25mV

Overvoltage Protection

Power on
Power off

±35V
±35V

Gain Accuracy

Gain = 1
Gain = 10
Gain = 100
Gain = 1000

0.04%
0.05%
0.05%
0.085%

Offset Voltage

RTO

±0.76mV

Bias Current

Single-ended
Differential

1.5mA
0.5nA

Input Impedance

Single-ended
Differential

5K ohms/40pF
5¹²ohms/40pF

Common Mode

Vcm = Vrange - (Vdiff * Gain)/2

Range (Vrange)

60Hz, 100 ohm imbalance

±10V, (dc + peak ac)

Rejection Error⁽¹⁾

Gain = 1
Gain = 10
Gain = 100
Gain = 200

-80dB (0.04LSB/V)
-90dB (0.13LSB/V)
-90dB (1.3LSB/V)
-90dB (2.6LSB/V)

Noise

Input grounded at connector; RMS Gain = 1
Gain = 1
Gain = 10
Gain = 100
Gain = 200

1LSB
2LSB
4LSB
6LSB

Monotonicity

No missing code

14 bits

Linearity Error

0.003%, ±2LSB

System Throughput⁽²⁾

Multichannel Analog Input

Installed on a PCI-20041C-3A board,
Gain = 1

85kHz

Physical Characteristics

Power Requirements ⁽³⁾
  +5V
  +15V
  -15V

345mA maximum
8mA maximum
4mA maximum

Operating Temperature Range

0 to +70°C

Notes: (1) For a single PCI-20341M-1 module without multiplexers connected through the I3 Bus. Connections to the Bus can reduce CMR. (2) Hardware limit only. Software may reduce speed. (3) Refer to the data sheet for the host board to determine available power.

PCI-20341M-1A 하드웨어 사진

PCI-20341M 하드웨어

한국인텔리젼트시스템(Korea Intelligent System) 전화 : 02-3272-9301 Email : sales@intelligent.co.kr

PCI-20341M-1A 하드웨어 사양
Parameter	Conditions	Specification
Analog Input
Number of Channels	Single-ended Differential	1 4
Resolution		16 bits (1 part in 65,536)
Voltage Ranges		±5V, ±0.5V , ±50mV, ±25mV
Overvoltage Protection	Power on Power off	±35V ±35V
Gain Accuracy	Gain = 1 Gain = 10 Gain = 100 Gain = 1000	0.04% 0.05% 0.05% 0.085%
Offset Voltage	RTO	±0.76mV
Bias Current	Single-ended Differential	1.5mA 0.5nA
Input Impedance	Single-ended Differential	5K ohms/40pF 5¹²ohms/40pF
Common Mode	Vcm = Vrange - (Vdiff * Gain)/2
Range (Vrange)	60Hz, 100 ohm imbalance	±10V, (dc + peak ac)
Rejection Error⁽¹⁾	Gain = 1 Gain = 10 Gain = 100 Gain = 200	-80dB (0.04LSB/V) -90dB (0.13LSB/V) -90dB (1.3LSB/V) -90dB (2.6LSB/V)
Noise	Input grounded at connector; RMS Gain = 1 Gain = 1 Gain = 10 Gain = 100 Gain = 200	1LSB 2LSB 4LSB 6LSB
Monotonicity	No missing code	14 bits
Linearity Error		0.003%, ±2LSB
System Throughput⁽²⁾
Multichannel Analog Input	Installed on a PCI-20041C-3A board, Gain = 1	85kHz
Physical Characteristics
Power Requirements ⁽³⁾ +5V +15V -15V		345mA maximum 8mA maximum 4mA maximum
Operating Temperature Range		0 to +70°C
Notes: (1) For a single PCI-20341M-1 module without multiplexers connected through the I3 Bus. Connections to the Bus can reduce CMR. (2) Hardware limit only. Software may reduce speed. (3) Refer to the data sheet for the host board to determine available power.